33512B outputs two different waveforms at the same time by trigger button

Frequently Asked Questions (FAQs)

Summary

Explain how 33512B outputs two different waveforms at the same time by trigger button.

Question

After downloading two different waveforms to 33512B two channels by Keysight BenchLink Waveform Builder, can user output them at the same time by pressing trigger button？

Answer

After you download the different waveforms to both channel 1 and channel 2, you will need to perform manual configuration from the front panel of the unit in order to trigger the 2 waveforms from different channel at the same time.
The manual configuration is per below:
1. Press channel 1-> Burst -> Infinite
2. Press Burst ON.
3. Press Channel 2-> Burst-> Infinite
4. Press Burst ON.
5. On channel 1, Press Trigger button, and it will change the trigger source for channel 1 to Manual.
6. On channel 2, Press Trigger button, and it will change the trigger source for channel 2 to Manual.
7. Press Trigger button again. It will trigger the output together from channel 1 and channel 2.